7 open source boards using the TXS0101DBVR
Real designs built with the TXS0101DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Anticheww
AcheronProject
303.2 × 94.2 mm419 parts2LCustom license25Nordic nRF
Luna65
NeilKhera
316.4 × 95.3 mm321 parts2LCustom license6RP2040/RP2350
Phoenix Project No 1 - Type H
mymakercorner
304 × 112 mm201 parts2LCC-BY-SA-4.03STM32
Sagittarius
AcheronProject
372.4 × 128.1 mm382 parts2LNo license0ESP32
LumaDD
xeno3dev
191.9 × 92.3 mm150 parts2LCC-BY-NC-4.00RP2040/RP2350
Phoenix Project No 1 - Type S
mymakercorner
304 × 112 mm139 parts2LCC-BY-SA-4.03STM32
Sagittarius
Astrid-Delestine
372.4 × 128.1 mm382 parts2LMIT0
How designs wire the TXS0101DBVR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TXS0101DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
- The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 4.7 µF).
- The OE pin is tied to 3.3V on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 100% |
|
| GNDpin 2 | Connected to: GND 83% · not connected 17% | — |
| OEpin 5 | Connected to: 3.3V 67% · a signal 33% | — |
| VCCBpin 6 | Connected to: 5V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Anticheww by AcheronProject, Luna65 by NeilKhera, Phoenix Project No 1 - Type H by mymakercorner and Sagittarius by AcheronProject.
The TXS0101DBVR in open source designs
The gallery holds 7 open source boards using the TXS0101DBVR from 6 GitHub repositories; a typical one measures about 304 × 111.9 mm and carries around 321 components.
100% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Anticheww by AcheronProject.
Microcontrollers on boards using the TXS0101DBVR
What boards using the TXS0101DBVR are built for
TXS0101DBVR: common questions
Where can I find a TXS0101DBVR reference design?
Each of the 7 boards on this page is a real design using the TXS0101DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXS0101DBVR VCCA pin?
The VCCA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the TXS0101DBVR.
What decoupling capacitors do designs use on the TXS0101DBVR VCCB pin?
The VCCB pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the TXS0101DBVR.
How is the TXS0101DBVR OE pin connected?
The OE pin is tied to 3.3V on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the TXS0101DBVR.
Which microcontrollers do boards using the TXS0101DBVR use?
Most are built on STM32 (3), RP2040/RP2350 (2), ESP32 (1) and Nordic nRF (1).
How big is a typical board using the TXS0101DBVR?
The median is 304 × 111.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the TXS0101DBVR?
By GitHub stars, Anticheww by AcheronProject, with 25 stars.
Can I simulate one of these boards using the TXS0101DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.