2 open source boards using the TXS0101DCK
Real designs built with the TXS0101DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SmartPrintCoreH7x
BoltzRnD
170.1 × 96.9 mm530 parts2LGPL-3.089RP2040/RP2350
DMXion 4port node
NEOgHacking
100 × 100 mm195 parts4LGPL-3.01
The TXS0101DCK in open source designs
The gallery holds 2 open source boards using the TXS0101DCK from 2 GitHub repositories; a typical one measures about 135 × 98.4 mm and carries around 363 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is SmartPrintCoreH7x by BoltzRnD.
Parts used alongside the TXS0101DCK
Microcontrollers on boards using the TXS0101DCK
What boards using the TXS0101DCK are built for
TXS0101DCK: common questions
Where can I find a TXS0101DCK reference design?
Each of the 2 boards on this page is a real design using the TXS0101DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXS0101DCK use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TXS0101DCK?
The median is 135 × 98.4 mm, and 50% are two-layer designs.
What is the most popular open source board using the TXS0101DCK?
By GitHub stars, SmartPrintCoreH7x by BoltzRnD, with 89 stars.
Can I simulate one of these boards using the TXS0101DCK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.