4 open source boards using the TXS0108EQPWRQ1
Real designs built with the TXS0108EQPWRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Syzygy breakout flash-LVL
adamcritchley
44.6 × 90 mm32 parts4LMIT2STM32
MONster64
schenkmi
57.9 × 67.9 mm58 parts2LGPL-3.00ESP32
MotorControllerNode
Monash-Railway-Express
100 × 100 mm30 parts4LNo license0ESP32
Lights Sensors Circuit
Monash-Railway-Express
100 × 100 mm27 parts2LNo license0
The TXS0108EQPWRQ1 in open source designs
The gallery holds 4 open source boards using the TXS0108EQPWRQ1 from 3 GitHub repositories; a typical one measures about 79 × 95 mm and carries around 31 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Syzygy breakout flash-LVL by adamcritchley.
Microcontrollers on boards using the TXS0108EQPWRQ1
What boards using the TXS0108EQPWRQ1 are built for
TXS0108EQPWRQ1: common questions
Where can I find a TXS0108EQPWRQ1 reference design?
Each of the 4 boards on this page is a real design using the TXS0108EQPWRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXS0108EQPWRQ1 use?
Most are built on ESP32 (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the TXS0108EQPWRQ1?
The median is 79 × 95 mm, and 50% are two-layer designs.
What is the most popular open source board using the TXS0108EQPWRQ1?
By GitHub stars, Syzygy breakout flash-LVL by adamcritchley, with 2 stars.
Can I simulate one of these boards using the TXS0108EQPWRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.