5 open source boards using the UCC27511ADBV
Real designs built with the UCC27511ADBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MistMaker-Battery-Kit
Dav1dyang
38 × 25.1 mm54 parts2LMIT26STM32
Reflow Plate Controller
incend1um3
95 × 43 mm73 parts4LCERN-OHL-S-2.02USB-C PD bench supply - power board
GarryBGoode
170 × 74.5 mm237 parts4LNo license0STM32
Fluxnode foc driver
PhiMaii
80 × 80 mm220 parts6LCERN-OHL-P-2.00STM32
E clutch controller with can
abdurrahman-eee
140 × 95 mm87 parts4LNo license0
How designs wire the UCC27511ADBV
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the UCC27511ADBV connects to, and the resistors, capacitors and other passives placed on it.
- The OUTH_2 pin has a series resistor on 5 of 5 designs, most often 4.7 Ω (then 10 Ω).
- The OUTL_3 pin has a series resistor on 5 of 5 designs, most often 2.2 Ω (then 22 Ω).
- The VDD_1 pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 2.2 µF).
- The IN+_6 pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ (then 100 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDD_1pin 1 | Connected to: 12V 80% · a signal 20% |
|
| OUTH_2pin 2 | Connected to: Signal 100% |
|
| OUTL_3pin 3 | Connected to: Signal 100% |
|
| GND_4pin 4 | Connected to: GND 80% · a signal 20% | — |
| IN-_5pin 5 | Connected to: GND 60% · a signal 40% | — |
| IN+_6pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MistMaker-Battery-Kit by Dav1dyang, Reflow Plate Controller by incend1um3, E clutch controller with can by abdurrahman-eee and USB-C PD bench supply - power board by GarryBGoode.
The UCC27511ADBV in open source designs
The gallery holds 5 open source boards using the UCC27511ADBV from 5 GitHub repositories; a typical one measures about 95 × 74.5 mm and carries around 87 components.
80% use four copper layers or more, and 60% carry an open source license.
The most starred is MistMaker-Battery-Kit by Dav1dyang.
Microcontrollers on boards using the UCC27511ADBV
What boards using the UCC27511ADBV are built for
UCC27511ADBV: common questions
Where can I find a UCC27511ADBV reference design?
Each of the 5 boards on this page is a real design using the UCC27511ADBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the UCC27511ADBV OUTH_2 pin?
The OUTH_2 pin has a series resistor on 5 of 5 designs, most often 4.7 Ω (then 10 Ω). Counted from the KiCad layouts of 5 open source designs using the UCC27511ADBV.
What resistor goes on the UCC27511ADBV OUTL_3 pin?
The OUTL_3 pin has a series resistor on 5 of 5 designs, most often 2.2 Ω (then 22 Ω). Counted from the KiCad layouts of 5 open source designs using the UCC27511ADBV.
What decoupling capacitors do designs use on the UCC27511ADBV VDD_1 pin?
The VDD_1 pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the UCC27511ADBV.
Which microcontrollers do boards using the UCC27511ADBV use?
Most are built on STM32 (3).
How big is a typical board using the UCC27511ADBV?
The median is 95 × 74.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the UCC27511ADBV?
By GitHub stars, MistMaker-Battery-Kit by Dav1dyang, with 26 stars.
Can I simulate one of these boards using the UCC27511ADBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.