4 open source boards using the USB2514B-AEZC

Real designs built with the USB2514B-AEZC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The USB2514B-AEZC in open source designs

The gallery holds 4 open source boards using the USB2514B-AEZC from 4 GitHub repositories; a typical one measures about 103.5 × 95 mm and carries around 216 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is My jetson nano baseboard by NVIDIA-AI-IOT.

Microcontrollers on boards using the USB2514B-AEZC

What boards using the USB2514B-AEZC are built for

USB2514B-AEZC: common questions

Where can I find a USB2514B-AEZC reference design?

Each of the 4 boards on this page is a real design using the USB2514B-AEZC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the USB2514B-AEZC use?

Most are built on ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the USB2514B-AEZC?

The median is 103.5 × 95 mm, and 50% are two-layer designs.

What is the most popular open source board using the USB2514B-AEZC?

By GitHub stars, My jetson nano baseboard by NVIDIA-AI-IOT, with 91 stars.

Can I simulate one of these boards using the USB2514B-AEZC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part