1 open source board using the USBLC6-2SC6SOT23-6
Real designs built with the USBLC6-2SC6SOT23-6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
niektbThe USBLC6-2SC6SOT23-6 in open source designs
The gallery holds 1 open source boards using the USBLC6-2SC6SOT23-6 from 1 GitHub repository; a typical one measures about 20 × 106 mm and carries around 112 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Toepler plus by niektb.
Microcontrollers on boards using the USBLC6-2SC6SOT23-6
What boards using the USBLC6-2SC6SOT23-6 are built for
USBLC6-2SC6SOT23-6: common questions
Where can I find a USBLC6-2SC6SOT23-6 reference design?
Each of the 1 boards on this page is a real design using the USBLC6-2SC6SOT23-6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USBLC6-2SC6SOT23-6 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the USBLC6-2SC6SOT23-6?
The median is 20 × 106 mm, and 100% are two-layer designs.
What is the most popular open source board using the USBLC6-2SC6SOT23-6?
By GitHub stars, Toepler plus by niektb, with 34 stars.
Can I simulate one of these boards using the USBLC6-2SC6SOT23-6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.