4 open source boards using the W65C02S6TQTG-14(TQFP44)
Real designs built with the W65C02S6TQTG-14(TQFP44), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Neo6502 Rev B
OLIMEX
80 × 55 mm98 parts2LNo license128RP2040/RP2350
Neo6502PC-CPU
OLIMEX
54 × 124 mm116 parts4LGPL-3.011RP2040/RP2350
Neo6502 Rev B1
OLIMEX
80 × 55 mm98 parts2LNo license128RP2040/RP2350
Neo6502 Rev A
OLIMEX
80 × 55 mm97 parts2LNo license128
The W65C02S6TQTG-14(TQFP44) in open source designs
The gallery holds 4 open source boards using the W65C02S6TQTG-14(TQFP44) from 2 GitHub repositories; a typical one measures about 80 × 55 mm and carries around 98 components.
75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Neo6502 Rev B1 by OLIMEX.
Parts used alongside the W65C02S6TQTG-14(TQFP44)
Microcontrollers on boards using the W65C02S6TQTG-14(TQFP44)
What boards using the W65C02S6TQTG-14(TQFP44) are built for
W65C02S6TQTG-14(TQFP44): common questions
Where can I find a W65C02S6TQTG-14(TQFP44) reference design?
Each of the 4 boards on this page is a real design using the W65C02S6TQTG-14(TQFP44). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the W65C02S6TQTG-14(TQFP44)?
The 74LVC245APW(TSSOP20), RP2040(QFN-56_7x7mm_P0.4mm) and ZD25Q16BTIGT(SOIC-8_208mils) appear in the most repositories here.
Which microcontrollers do boards using the W65C02S6TQTG-14(TQFP44) use?
Most are built on RP2040/RP2350 (4).
How big is a typical board using the W65C02S6TQTG-14(TQFP44)?
The median is 80 × 55 mm, and 75% are two-layer designs.
What is the most popular open source board using the W65C02S6TQTG-14(TQFP44)?
By GitHub stars, Neo6502 Rev B1 by OLIMEX, with 128 stars.
Can I simulate one of these boards using the W65C02S6TQTG-14(TQFP44) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.