8 open source boards using the WM8731

Real designs built with the WM8731, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the WM8731

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the WM8731 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a decoupling capacitor on 8 of 8 designs, most often 10 µF (then 100 nF).
  • Pin 16 has a capacitor to GND on 8 of 8 designs, most often 10 µF (then 100 nF).
  • Pin 27 has a decoupling capacitor on 8 of 8 designs, most often 10 µF (then 100 nF).
  • Pin 14 has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
Pin 1Connected to: 3.3V 75% · a signal 25%
  • Decoupling capacitor on 100% · 10 µF (10), 100 nF (10)
Pin 2Connected to: Not connected 100%
Pin 8Connected to: 3.3V 75%
  • Decoupling capacitor on 75% · 100 nF (9), 10 µF (5)
Pin 9Connected to: Signal 88%
  • Series capacitor on 50% · 220 µF (4)
Pin 10Connected to: Signal 75% · not connected 25%
  • Series capacitor on 50% · 220 µF (4)
Pin 11Connected to: GND 100%
Pin 12Connected to: Signal 75% · not connected 25%
  • Series capacitor on 75% · 10 µF (3), 1 µF (2)
Pin 13Connected to: Signal 75% · not connected 25%
  • Series capacitor on 75% · 10 µF (3), 1 µF (2)
Pin 14Connected to: 3.3V 75% · a signal 25%
  • Decoupling capacitor on 88% · 100 nF (13), 10 µF (12)
Pin 15Connected to: GND 100%
Pin 16Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (8), 100 nF (6)
Pin 19Connected to: A connector 25%
  • Series capacitor on 63% · 10 µF (2), 1 µF (2), 1 nF (1)
Pin 20Connected to: A connector 25%
  • Series capacitor on 63% · 10 µF (2), 1 µF (2), 1 nF (1)
Pin 21Connected to: GND 63% · a signal 25%
Pin 23Connected to: The microcontroller 50%, a connector 38%
  • Pull-up to VLOGIC on 38% · 1 e-13Ω (2), 10 kΩ (1), 2.2 kΩ (1)
Pin 24Connected to: The microcontroller 50%, a connector 38%
  • Pull-up to VLOGIC on 38% · 1 e-13Ω (2), 10 kΩ (1), 2.2 kΩ (1)
Pin 25Connected to: The microcontroller 25% · not connected 25%
  • Capacitor to GND on 38% · 18 pF (2), 22 pF (1)
  • Crystal on 38% · 12.288 MHz (2), 11.2896 MHz (1)
Pin 26Connected to: Not connected 63% · a signal 38%
  • Capacitor to GND on 38% · 18 pF (2), 22 pF (1)
  • Crystal on 38% · 12.288 MHz (2), 11.2896 MHz (1)
Pin 27Connected to: 3.3V 88%
  • Decoupling capacitor on 100% · 10 µF (10), 100 nF (6)
Pin 28Connected to: GND 100%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Guitarboard by JonasNorling, ESP32-Eurorack-Audio by ctag-fh-kiel, I2s audio phat by skiselev and Bz hat by dvr0.

The WM8731 in open source designs

The gallery holds 8 open source boards using the WM8731 from 8 GitHub repositories; a typical one measures about 71.6 × 70.6 mm and carries around 80 components.

63% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Guitarboard by JonasNorling.

Parts used alongside the WM8731

Microcontrollers on boards using the WM8731

What boards using the WM8731 are built for

WM8731: common questions

Where can I find a WM8731 reference design?

Each of the 8 boards on this page is a real design using the WM8731. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the WM8731 pin 1?

Pin 1 has a decoupling capacitor on 8 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the WM8731.

How is the WM8731 pin 16 connected?

Pin 16 has a capacitor to GND on 8 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the WM8731.

What decoupling capacitors do designs use on the WM8731 pin 27?

Pin 27 has a decoupling capacitor on 8 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the WM8731.

What parts are used alongside the WM8731?

The MCP3208, MCP6004 and TL074 appear in the most repositories here.

Which microcontrollers do boards using the WM8731 use?

Most are built on STM32 (3), ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the WM8731?

The median is 71.6 × 70.6 mm, and 63% are two-layer designs.

What is the most popular open source board using the WM8731?

By GitHub stars, Guitarboard by JonasNorling, with 97 stars.

Can I simulate one of these boards using the WM8731 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part