8 open source boards using the XIAO
Real designs built with the XIAO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
AnothaOne
StrawberryTurtle
95.5 × 73 mm9 parts2LMIT8RP2040/RP2350
Sirith pico
winedarksea
158.3 × 50 mm272 parts4LCERN-OHL-W-2.02Xmas2024
sensemakersamsterdam
80 × 45 mm28 parts2LGPL-3.02Hackpad
SiriusW823
59 × 40 mm4 parts2LMIT0SensorBoard
MUNAKATA-EPC
100 × 100 mm91 parts2LNo license0Xiao kb01
sago35
90 × 90 mm43 parts2LMIT118Xiao kb01
nobodywasishere
90 × 90 mm43 parts2LNo license0LineIntegratedBoard
MUNAKATA-EPC
31.7 × 28 mm6 parts2LNo license0
How designs wire the XIAO
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XIAO connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 13 | Connected to: GND 100% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Xiao kb01 by sago35, AnothaOne by StrawberryTurtle, Xmas2024 by sensemakersamsterdam and Sirith pico by winedarksea.
The XIAO in open source designs
The gallery holds 8 open source boards using the XIAO from 7 GitHub repositories; a typical one measures about 90 × 61.5 mm and carries around 36 components.
88% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Xiao kb01 by sago35.
Microcontrollers on boards using the XIAO
What boards using the XIAO are built for
XIAO: common questions
Where can I find a XIAO reference design?
Each of the 8 boards on this page is a real design using the XIAO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XIAO use?
Most are built on Nordic nRF (1) and RP2040/RP2350 (1).
How big is a typical board using the XIAO?
The median is 90 × 61.5 mm, and 88% are two-layer designs.
What is the most popular open source board using the XIAO?
By GitHub stars, Xiao kb01 by sago35, with 118 stars.
Can I simulate one of these boards using the XIAO before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.