2 open source boards using the XIAO ESP32-S3 Sense

Real designs built with the XIAO ESP32-S3 Sense, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The XIAO ESP32-S3 Sense in open source designs

The gallery holds 2 open source boards using the XIAO ESP32-S3 Sense from 2 GitHub repositories; a typical one measures about 60 × 40 mm and carries around 15 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Chytra budka by TeTeHacko.

Microcontrollers on boards using the XIAO ESP32-S3 Sense

What boards using the XIAO ESP32-S3 Sense are built for

XIAO ESP32-S3 Sense: common questions

Where can I find a XIAO ESP32-S3 Sense reference design?

Each of the 2 boards on this page is a real design using the XIAO ESP32-S3 Sense. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the XIAO ESP32-S3 Sense use?

Most are built on ESP32 (2).

How big is a typical board using the XIAO ESP32-S3 Sense?

The median is 60 × 40 mm, and 100% are two-layer designs.

What is the most popular open source board using the XIAO ESP32-S3 Sense?

By GitHub stars, Chytra budka by TeTeHacko, with 1 stars.

Can I simulate one of these boards using the XIAO ESP32-S3 Sense before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part