2 open source boards using the AMS1117-1.5
Real designs built with the AMS1117-1.5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
WCH CH32/CH55xTrhmsx
cristianoag
150.4 × 120.4 mm127 parts4LNo license29
ESP8266Trhmsx
wagnertavares
150.4 × 120.4 mm120 parts4LNo license4
The AMS1117-1.5 in open source designs
The gallery holds 2 open source boards using the AMS1117-1.5 from 2 GitHub repositories; a typical one measures about 150.4 × 120.4 mm and carries around 124 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Trhmsx by cristianoag.
Parts used alongside the AMS1117-1.5
Microcontrollers on boards using the AMS1117-1.5
What boards using the AMS1117-1.5 are built for
AMS1117-1.5: common questions
Where can I find a AMS1117-1.5 reference design?
Each of the 2 boards on this page is a real design using the AMS1117-1.5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AMS1117-1.5?
The AMS1117-3.3, EP1C12Q240C8N, EPCS4, M51953BFP and MT48LC16M16A2TG appear in the most repositories here.
Which microcontrollers do boards using the AMS1117-1.5 use?
Most are built on WCH CH32/CH55x (1) and ESP8266 (1).
How big is a typical board using the AMS1117-1.5?
The median is 150.4 × 120.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the AMS1117-1.5?
By GitHub stars, Trhmsx by cristianoag, with 29 stars.
Can I simulate one of these boards using the AMS1117-1.5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.