2 open source boards using the AP2210N-3.3
Real designs built with the AP2210N-3.3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32FlexiBMS hardware
SimosMCmuffin
65 × 35 mm204 parts4LCC-BY-NC-4.014
STM32FlexiBMS hardware
alksdesu
65 × 35 mm204 parts4LCC-BY-NC-4.00
The AP2210N-3.3 in open source designs
The gallery holds 2 open source boards using the AP2210N-3.3 from 2 GitHub repositories; a typical one measures about 65 × 35 mm and carries around 204 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is FlexiBMS hardware by SimosMCmuffin.
Parts used alongside the AP2210N-3.3
Microcontrollers on boards using the AP2210N-3.3
What boards using the AP2210N-3.3 are built for
AP2210N-3.3: common questions
Where can I find a AP2210N-3.3 reference design?
Each of the 2 boards on this page is a real design using the AP2210N-3.3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AP2210N-3.3?
The ISL28022, LTC3873, LTC6803-3, MAX17502F and MAX5215 appear in the most repositories here.
Which microcontrollers do boards using the AP2210N-3.3 use?
Most are built on STM32 (2).
How big is a typical board using the AP2210N-3.3?
The median is 65 × 35 mm, and 0% are two-layer designs.
What is the most popular open source board using the AP2210N-3.3?
By GitHub stars, FlexiBMS hardware by SimosMCmuffin, with 14 stars.
Can I simulate one of these boards using the AP2210N-3.3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.