6 open source boards using the AP63205WU-7
Real designs built with the AP63205WU-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiOpen-FlipDisk
shashwtd
111.6 × 68.8 mm47 parts2LNo license3- schematic only · 82 partsSTM32
Filament-Guillotine
Zephino
82 partsCC-BY-SA-4.02 
AVR/ArduinoQueue-Local-Display-ATmega328PB
ByNS-KARACA
340 × 100 mm188 parts2LNo license0
Raspberry PiBalise tofs
EsialRobotik
95.4 × 95.4 mm97 parts4LNo license0
Mains
micthiesen
150 × 110 mm22 parts2LNo license0
Power smt
clydeshaffer
38.1 × 28 mm11 parts2LNo license146
The AP63205WU-7 in open source designs
The gallery holds 6 open source boards using the AP63205WU-7 from 6 GitHub repositories; a typical one measures about 111.6 × 95.4 mm and carries around 65 components.
80% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Power smt by clydeshaffer.
Microcontrollers on boards using the AP63205WU-7
What boards using the AP63205WU-7 are built for
AP63205WU-7: common questions
Where can I find a AP63205WU-7 reference design?
Each of the 6 boards on this page is a real design using the AP63205WU-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP63205WU-7 use?
Most are built on Raspberry Pi (2), AVR/Arduino (1) and STM32 (1).
How big is a typical board using the AP63205WU-7?
The median is 111.6 × 95.4 mm, and 80% are two-layer designs.
What is the most popular open source board using the AP63205WU-7?
By GitHub stars, Power smt by clydeshaffer, with 146 stars.
Can I simulate one of these boards using the AP63205WU-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.