3 open source boards using the ATECC608A-MAHDA
Real designs built with the ATECC608A-MAHDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Diva card
diva-eng
85.4 × 53.7 mm92 parts2LMIT4
Require
facethesouth
68 × 26 mm180 parts6LGPL-3.03
Raspberry PiCM4Card
will127534
64.6 × 44 mm54 parts4LMIT95
The ATECC608A-MAHDA in open source designs
The gallery holds 3 open source boards using the ATECC608A-MAHDA from 3 GitHub repositories; a typical one measures about 68 × 44 mm and carries around 92 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is CM4Card by will127534.
Microcontrollers on boards using the ATECC608A-MAHDA
What boards using the ATECC608A-MAHDA are built for
ATECC608A-MAHDA: common questions
Where can I find a ATECC608A-MAHDA reference design?
Each of the 3 boards on this page is a real design using the ATECC608A-MAHDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATECC608A-MAHDA use?
Most are built on Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the ATECC608A-MAHDA?
The median is 68 × 44 mm, and 33% are two-layer designs.
What is the most popular open source board using the ATECC608A-MAHDA?
By GitHub stars, CM4Card by will127534, with 95 stars.
Can I simulate one of these boards using the ATECC608A-MAHDA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.