2 open source boards using the ATGM336H-5NR32
Real designs built with the ATGM336H-5NR32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAMTiny4FSK
New-England-Weather-Balloon-Society
35.1 × 76.3 mm80 parts4LCERN-OHL-W-2.095
ESP32Waypoint
M-Mrk
140 × 80 mm129 parts4LNo license0
The ATGM336H-5NR32 in open source designs
The gallery holds 2 open source boards using the ATGM336H-5NR32 from 2 GitHub repositories; a typical one measures about 87.5 × 78.2 mm and carries around 105 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Tiny4FSK by New-England-Weather-Balloon-Society.
Microcontrollers on boards using the ATGM336H-5NR32
What boards using the ATGM336H-5NR32 are built for
ATGM336H-5NR32: common questions
Where can I find a ATGM336H-5NR32 reference design?
Each of the 2 boards on this page is a real design using the ATGM336H-5NR32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATGM336H-5NR32 use?
Most are built on ESP32 (1) and Microchip SAM (1).
How big is a typical board using the ATGM336H-5NR32?
The median is 87.5 × 78.2 mm, and 0% are two-layer designs.
What is the most popular open source board using the ATGM336H-5NR32?
By GitHub stars, Tiny4FSK by New-England-Weather-Balloon-Society, with 95 stars.
Can I simulate one of these boards using the ATGM336H-5NR32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.