3 open source boards using the BNO055_Module
Real designs built with the BNO055_Module, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiAuxiliary board
reubenstr
93 × 56 mm31 parts2LNo license242
Raspberry PiExpansion board
100 × 49.8 mm75 parts4LMIT51
Raspberry PiAuxiliary board
akshatbansaltech
93 × 56 mm31 parts2LMIT1
The BNO055_Module in open source designs
The gallery holds 3 open source boards using the BNO055_Module from 3 GitHub repositories; a typical one measures about 93 × 56 mm and carries around 31 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Auxiliary board by reubenstr.
Parts used alongside the BNO055_Module
Microcontrollers on boards using the BNO055_Module
What boards using the BNO055_Module are built for
BNO055_Module: common questions
Where can I find a BNO055_Module reference design?
Each of the 3 boards on this page is a real design using the BNO055_Module. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BNO055_Module use?
Most are built on Raspberry Pi (3).
How big is a typical board using the BNO055_Module?
The median is 93 × 56 mm, and 67% are two-layer designs.
What is the most popular open source board using the BNO055_Module?
By GitHub stars, Auxiliary board by reubenstr, with 242 stars.
Can I simulate one of these boards using the BNO055_Module before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.