4 open source boards using the C12512
Real designs built with the C12512, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiOwl driver board-16
geezacoleman
234.4 × 56 mm445 parts4LMIT13
Raspberry PiPanel-16
250.4 × 131 mm445 parts4LMIT13
Raspberry PiOwl driver board
65 × 56 mm168 parts2LMIT13
Raspberry PiPanel
149 × 131 mm168 parts2LMIT13
The C12512 in open source designs
The gallery holds 4 open source boards using the C12512 from 1 GitHub repository; a typical one measures about 191.7 × 93.5 mm and carries around 307 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Panel-16 by geezacoleman.
Microcontrollers on boards using the C12512
C12512: common questions
Where can I find a C12512 reference design?
Each of the 4 boards on this page is a real design using the C12512. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the C12512 use?
Most are built on Raspberry Pi (4).
How big is a typical board using the C12512?
The median is 191.7 × 93.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the C12512?
By GitHub stars, Panel-16 by geezacoleman, with 13 stars.
Can I simulate one of these boards using the C12512 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.