7 open source boards using the D168K
Real designs built with the D168K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32MVCU F407
Vaaarad07
132.9 × 108.4 mm100 parts4LMIT10
Preperf 10x10 V1
ApophisXIV
100 × 100 mm1359 parts8LNo license2
PICEduBoard PIC16
hassan-ibn-mustafa
193.5 × 141 mm72 parts2LNo license1
AVR/ArduinoMatrix-7seg8-x02-x06
McbeEringi
95 × 100 mm51 parts2LMIT2
AVR/ArduinoSerial usbc dip-7seg clk
100 × 100 mm42 parts2LMIT2
Output register
ifilot
101.6 × 55.9 mm30 parts2LCERN-OHL-S-2.02
C3-wroom ext clk set
94 × 95.2 mm27 parts2LMIT2
The D168K in open source designs
The gallery holds 7 open source boards using the D168K from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 51 components.
71% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is MVCU F407 by Vaaarad07.
Parts used alongside the D168K
Microcontrollers on boards using the D168K
What boards using the D168K are built for
D168K: common questions
Where can I find a D168K reference design?
Each of the 7 boards on this page is a real design using the D168K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the D168K use?
Most are built on AVR/Arduino (2), PIC (1) and STM32 (1).
How big is a typical board using the D168K?
The median is 100 × 100 mm, and 71% are two-layer designs.
What is the most popular open source board using the D168K?
By GitHub stars, MVCU F407 by Vaaarad07, with 10 stars.
Can I simulate one of these boards using the D168K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.