13 open source boards using the INA238AIDGSR
Real designs built with the INA238AIDGSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ESPHome-Indoor-Multi-Sensor
mikelawrence
52.5 × 59.7 mm97 parts4LCERN-OHL-P-2.012
ESP32Benchpod
embeddedci-com
82 × 90 mm306 parts4LCERN-OHL-W-2.01
ESP32Esphome rgbcct led controller
100 × 45 mm82 parts6LCERN-OHL-P-2.01
ESP32Atx-24pin rev3-candidate
nathanfraske
86 × 95 mm126 parts6LApache-2.00
ESP32Eps-8pin rev3
96 × 40 mm63 parts4LApache-2.00
ESP32Pcie3-rev2
103.4 × 44 mm54 parts4LApache-2.00
ESP32Pcie3-rev2-routed
103.4 × 44 mm54 parts4LApache-2.00
ESP32CEC PCIe 8-pin 3-Port Module
103.4 × 56 mm54 parts4LApache-2.00
ESP32Build final
96.1 × 43.7 mm45 parts4LApache-2.00
ESP32Eps rev3-n2
96.1 × 43.7 mm45 parts4LApache-2.00
ESP32Pcie2-inrow
86.4 × 44 mm45 parts4LApache-2.00
ESP32Pcie2-inrow routed
86.4 × 44 mm45 parts4LApache-2.00
ESP32CEC PCIe 8-pin 2-Port Module
86.4 × 44 mm45 parts4LApache-2.00
The INA238AIDGSR in open source designs
The gallery holds 13 open source boards using the INA238AIDGSR from 4 GitHub repositories; a typical one measures about 96 × 44 mm and carries around 54 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is ESPHome-Indoor-Multi-Sensor by mikelawrence.
Microcontrollers on boards using the INA238AIDGSR
What boards using the INA238AIDGSR are built for
INA238AIDGSR: common questions
Where can I find a INA238AIDGSR reference design?
Each of the 13 boards on this page is a real design using the INA238AIDGSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA238AIDGSR use?
Most are built on ESP32 (13).
How big is a typical board using the INA238AIDGSR?
The median is 96 × 44 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA238AIDGSR?
By GitHub stars, ESPHome-Indoor-Multi-Sensor by mikelawrence, with 12 stars.
Can I simulate one of these boards using the INA238AIDGSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.