3 open source boards using the LP2950-3.3_TO252
Real designs built with the LP2950-3.3_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Den v3
makizusi
98 × 98 mm57 parts2LNo license0
STM32DM v3
98 × 98 mm57 parts2LNo license0
STM32DD v8
100 × 60 mm50 parts2LNo license0
The LP2950-3.3_TO252 in open source designs
The gallery holds 3 open source boards using the LP2950-3.3_TO252 from 1 GitHub repository; a typical one measures about 98 × 98 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is DM v3 by makizusi.
Microcontrollers on boards using the LP2950-3.3_TO252
LP2950-3.3_TO252: common questions
Where can I find a LP2950-3.3_TO252 reference design?
Each of the 3 boards on this page is a real design using the LP2950-3.3_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LP2950-3.3_TO252 use?
Most are built on STM32 (3).
How big is a typical board using the LP2950-3.3_TO252?
The median is 98 × 98 mm, and 100% are two-layer designs.
What is the most popular open source board using the LP2950-3.3_TO252?
By GitHub stars, DM v3 by makizusi, with 0 stars.
Can I simulate one of these boards using the LP2950-3.3_TO252 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.