7 open source boards using the LSM6DS3
Real designs built with the LSM6DS3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32FreeEEG32-alpha1.5
neuroidss
70 × 70 mm192 parts4LAGPL-3.023
ESP32OSCD Demo
tmjnijssen
94.6 × 94.6 mm76 parts4LCERN-OHL-P-2.03
ESP32Drone ESP32
Asaf66
102.9 × 103.7 mm73 parts2LNo license0
STM32Usb
99.1 × 99.1 mm185 parts2LAGPL-3.023
STM32Usb1
99.1 × 99.1 mm185 parts2LAGPL-3.023
STM32Usb2
99.1 × 99.1 mm185 parts2LAGPL-3.023
STM32Usb3
99.1 × 99.1 mm185 parts2LAGPL-3.023
The LSM6DS3 in open source designs
The gallery holds 7 open source boards using the LSM6DS3 from 3 GitHub repositories; a typical one measures about 99.1 × 99.1 mm and carries around 185 components.
71% are two-layer designs, the rest use four layers or more, and 86% carry an open source license.
The most starred is FreeEEG32-alpha1.5 by neuroidss.
What boards using the LSM6DS3 are built for
LSM6DS3: common questions
Where can I find a LSM6DS3 reference design?
Each of the 7 boards on this page is a real design using the LSM6DS3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LSM6DS3 use?
Most are built on STM32 (5) and ESP32 (2).
How big is a typical board using the LSM6DS3?
The median is 99.1 × 99.1 mm, and 71% are two-layer designs.
What is the most popular open source board using the LSM6DS3?
By GitHub stars, FreeEEG32-alpha1.5 by neuroidss, with 23 stars.
Can I simulate one of these boards using the LSM6DS3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.