3 open source boards using the LW5912N23D
Real designs built with the LW5912N23D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAMain jig
mackieks
51.3 × 48.2 mm21 parts2LSHL-2.140
FPGATypeA
20.8 × 26.5 mm5 parts2LSHL-2.140
FPGATypeC
17 × 21.3 mm5 parts2LSHL-2.140
The LW5912N23D in open source designs
The gallery holds 3 open source boards using the LW5912N23D from 1 GitHub repository; a typical one measures about 20.8 × 26.5 mm and carries around 5 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Main jig by mackieks.
Microcontrollers on boards using the LW5912N23D
LW5912N23D: common questions
Where can I find a LW5912N23D reference design?
Each of the 3 boards on this page is a real design using the LW5912N23D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LW5912N23D use?
Most are built on FPGA (3).
How big is a typical board using the LW5912N23D?
The median is 20.8 × 26.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the LW5912N23D?
By GitHub stars, Main jig by mackieks, with 40 stars.
Can I simulate one of these boards using the LW5912N23D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.