9 open source boards using the M24C02-WMN
Real designs built with the M24C02-WMN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zoxnoxious Z5524 (SSI2130/AS3394)
brer-rabbit
80 × 80 mm222 parts4LGPL-3.068
STM32STM32F103RB USB to UART SPI I2C
Stulinaz
80 × 80 mm67 parts2LNo license23
AVR/ArduinoHw openmower yardforce
xtech
180 × 170 mm275 parts4LCC-BY-4.012
ESP32Smart uppatvind
moucha19
74 × 36 mm66 parts4LCERN-OHL-W-2.05
Z3340 VCO
80 × 80 mm139 parts4LGPL-3.068
Z3372 Filter
80 × 80 mm120 parts4LGPL-3.068
Raspberry PiZoxnoxious Backplane and VCA
133.8 × 102.9 mm86 parts4LGPL-3.068
Zoxnoxious 2203 FM Operator Type-N (OPN)
80 × 80 mm34 parts4LGPL-3.068
Zoxnoxiouscard
80 × 80 mm16 parts4LGPL-3.068
The M24C02-WMN in open source designs
The gallery holds 9 open source boards using the M24C02-WMN from 4 GitHub repositories; a typical one measures about 80 × 80 mm and carries around 86 components.
89% use four copper layers or more, and 89% carry an open source license.
The most starred is Zoxnoxious Z5524 (SSI2130/AS3394) by brer-rabbit.
Microcontrollers on boards using the M24C02-WMN
What boards using the M24C02-WMN are built for
M24C02-WMN: common questions
Where can I find a M24C02-WMN reference design?
Each of the 9 boards on this page is a real design using the M24C02-WMN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the M24C02-WMN use?
Most are built on AVR/Arduino (1), ESP32 (1), Raspberry Pi (1) and STM32 (1).
How big is a typical board using the M24C02-WMN?
The median is 80 × 80 mm, and 11% are two-layer designs.
What is the most popular open source board using the M24C02-WMN?
By GitHub stars, Zoxnoxious Z5524 (SSI2130/AS3394) by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the M24C02-WMN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.