3 open source boards using the MIC29302WU
Real designs built with the MIC29302WU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Access controller
physiii
150 × 90 mm186 parts4LNo license13
AVR/ArduinoOverHead v1
stefanofinetti
313 × 206 mm345 parts4LGPL-3.05
AVR/ArduinoOVHD Mainboard
137 × 89 mm123 parts2LGPL-3.05
The MIC29302WU in open source designs
The gallery holds 3 open source boards using the MIC29302WU from 2 GitHub repositories; a typical one measures about 150 × 90 mm and carries around 186 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Access controller by physiii.
Parts used alongside the MIC29302WU
Microcontrollers on boards using the MIC29302WU
What boards using the MIC29302WU are built for
MIC29302WU: common questions
Where can I find a MIC29302WU reference design?
Each of the 3 boards on this page is a real design using the MIC29302WU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC29302WU use?
Most are built on AVR/Arduino (2) and ESP32 (1).
How big is a typical board using the MIC29302WU?
The median is 150 × 90 mm, and 33% are two-layer designs.
What is the most popular open source board using the MIC29302WU?
By GitHub stars, Access controller by physiii, with 13 stars.
Can I simulate one of these boards using the MIC29302WU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.