4 open source boards using the MIC5219-5.0YM5
Real designs built with the MIC5219-5.0YM5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CTA control board
PySpice-org
252 × 152 mm614 parts4LNo license9
ESP8266Labs
markentier
30 × 24.9 mm19 parts2LNo license2
AVR/ArduinoDevelopment boards
Coolbots7
21 × 50 mm33 parts2LNo license1
Sensori-FeatherWing
bergold
50.8 × 22.9 mm17 parts2LNo license1
The MIC5219-5.0YM5 in open source designs
The gallery holds 4 open source boards using the MIC5219-5.0YM5 from 4 GitHub repositories; a typical one measures about 40.4 × 37.4 mm and carries around 26 components.
75% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is CTA control board by PySpice-org.
Microcontrollers on boards using the MIC5219-5.0YM5
What boards using the MIC5219-5.0YM5 are built for
MIC5219-5.0YM5: common questions
Where can I find a MIC5219-5.0YM5 reference design?
Each of the 4 boards on this page is a real design using the MIC5219-5.0YM5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5219-5.0YM5 use?
Most are built on AVR/Arduino (1) and ESP8266 (1).
How big is a typical board using the MIC5219-5.0YM5?
The median is 40.4 × 37.4 mm, and 75% are two-layer designs.
What is the most popular open source board using the MIC5219-5.0YM5?
By GitHub stars, CTA control board by PySpice-org, with 9 stars.
Can I simulate one of these boards using the MIC5219-5.0YM5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.