6 open source boards using the MIC5365-3.3YC5
Real designs built with the MIC5365-3.3YC5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAIceduino
RubenVoell
80 × 100 mm241 parts4LCERN-OHL-1.23
I2C-Level-Converter
bluerobotics
34 × 11.6 mm15 parts2LMIT0
RISC-VAdin1100 podl
dragonlock2
72 × 24 mm125 parts2LApache-2.013
AVR/ArduinoPsu monitor
67 × 28 mm94 parts2LApache-2.013
NXPJABICAN-USB Pro
70.3 × 38 mm91 parts2LApache-2.013
Artemis
22.8 × 33.4 mm37 parts2LApache-2.013
The MIC5365-3.3YC5 in open source designs
The gallery holds 6 open source boards using the MIC5365-3.3YC5 from 3 GitHub repositories; a typical one measures about 68.6 × 30.7 mm and carries around 93 components.
83% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Adin1100 podl by dragonlock2.
Microcontrollers on boards using the MIC5365-3.3YC5
What boards using the MIC5365-3.3YC5 are built for
MIC5365-3.3YC5: common questions
Where can I find a MIC5365-3.3YC5 reference design?
Each of the 6 boards on this page is a real design using the MIC5365-3.3YC5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5365-3.3YC5 use?
Most are built on AVR/Arduino (1), FPGA (1), NXP (1) and RISC-V (1).
How big is a typical board using the MIC5365-3.3YC5?
The median is 68.6 × 30.7 mm, and 83% are two-layer designs.
What is the most popular open source board using the MIC5365-3.3YC5?
By GitHub stars, Adin1100 podl by dragonlock2, with 13 stars.
Can I simulate one of these boards using the MIC5365-3.3YC5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.