4 open source boards using the MIC5504-1.2YM5
Real designs built with the MIC5504-1.2YM5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGASaintcon2019TopBoard
compukidmike
148.3 × 147.3 mm1112 parts4LNo license20
FPGAMppcInterface
muonTelescope
100 × 100 mm216 parts2LNo license6
FPGAGLOWCOST-2v2-mppcInterface-
tharinduudu
65 × 56.5 mm194 parts6LNo license1
FPGASaintconMinibadgeDisplay10x10
264.2 × 264.2 mm132 parts2LNo license20
The MIC5504-1.2YM5 in open source designs
The gallery holds 4 open source boards using the MIC5504-1.2YM5 from 3 GitHub repositories; a typical one measures about 124.2 × 123.7 mm and carries around 205 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Saintcon2019TopBoard by compukidmike.
Parts used alongside the MIC5504-1.2YM5
Microcontrollers on boards using the MIC5504-1.2YM5
What boards using the MIC5504-1.2YM5 are built for
MIC5504-1.2YM5: common questions
Where can I find a MIC5504-1.2YM5 reference design?
Each of the 4 boards on this page is a real design using the MIC5504-1.2YM5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5504-1.2YM5 use?
Most are built on FPGA (4).
How big is a typical board using the MIC5504-1.2YM5?
The median is 124.2 × 123.7 mm, and 50% are two-layer designs.
What is the most popular open source board using the MIC5504-1.2YM5?
By GitHub stars, Saintcon2019TopBoard by compukidmike, with 20 stars.
Can I simulate one of these boards using the MIC5504-1.2YM5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.