11 open source boards using the MP2307
Real designs built with the MP2307, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Z3660 by sHaNsHe (Double H Tech)
shanshe
173.9 × 93.4 mm159 parts4LGPL-3.077
STM32PCB Fujitora
OPRobots
99.6 × 100 mm102 parts2LGPL-3.065
AVR/ArduinoNodo BMS
AugustoS97
149.2 × 83.7 mm107 parts2LGPL-3.07
EasyDABv2
KaiBLI
99.8 × 49.8 mm171 parts2LGPL-2.02
ESP32Esp32-c3-board bms
ieb
94.9 × 40.6 mm39 parts2LNo license2
STM32Sdisfp
cleverfox
169.7 × 75.2 mm147 parts2LNo license1
ESP32Soil metrics
Aryan-git-byte
88.3 × 112.3 mm74 parts4LMIT1
ESP32Repositor Automático V8 (Primer Final)
Pierini-Franco
80.2 × 59.8 mm56 parts2LNo license1
STM32Combo ports
169.7 × 64 mm127 parts2LNo license1
ESP32Repositor Automático-Version 2024-3(a probar)
80.2 × 59.8 mm53 parts2LNo license1
ESP32Repositor Automático-Version 2024-4(a probar)
80.2 × 59.8 mm53 parts2LNo license1
The MP2307 in open source designs
The gallery holds 11 open source boards using the MP2307 from 8 GitHub repositories; a typical one measures about 99.6 × 64 mm and carries around 102 components.
82% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is Z3660 by sHaNsHe (Double H Tech) by shanshe.
Microcontrollers on boards using the MP2307
What boards using the MP2307 are built for
MP2307: common questions
Where can I find a MP2307 reference design?
Each of the 11 boards on this page is a real design using the MP2307. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MP2307 use?
Most are built on ESP32 (5), STM32 (3) and AVR/Arduino (1).
How big is a typical board using the MP2307?
The median is 99.6 × 64 mm, and 82% are two-layer designs.
What is the most popular open source board using the MP2307?
By GitHub stars, Z3660 by sHaNsHe (Double H Tech) by shanshe, with 77 stars.
Can I simulate one of these boards using the MP2307 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.