20 open source boards using the MP2307

Real designs built with the MP2307, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

20 boardsClear filters|Most starred

How designs wire the MP2307

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the MP2307 connects to, and the resistors, capacitors and other passives placed on it.

  • The BS pin has a series capacitor on 12 of 15 designs, most often 10 nF.
  • The SW pin has a series capacitor on 12 of 15 designs, most often 10 nF.
  • The FB pin has a resistor to GND on 12 of 12 designs, most often 10 kΩ (then 15 kΩ).
  • The SS pin has a capacitor to GND on 12 of 12 designs, most often 100 nF.
BSpin 1Connected to: Signal 93%
  • Series capacitor on 80% · 10 nF (12)
VINpin 2Connected to: VIN 53% · GND 20% · a signal 27%
  • Decoupling capacitor on 60% · 10 µF (8), 100 nF (2), 100 µF (1)
SWpin 3Connected to: Signal 87%
  • Series capacitor on 80% · 10 nF (12)
  • Inductor on 73% · 10 µH (8), 2 µH (2), 22 µH (1)
GNDpin 4, 9Connected to: GND 96%
FBpin 5Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (7), 15 kΩ (2), 8.2 kΩ (2)
  • Pull-up to 3.3V on 50% · 39 kΩ (2), 44.2 kΩ (2), 30.9 kΩ (1)
COMPpin 6Connected to: Signal 100%
  • Series capacitor on 83% · 3.9 nF (7), 4.8 nF (1), 3.3 nF (1)
ENpin 7Connected to: Signal 100%
  • Pull-up to VIN on 67% · 100 kΩ (7)
  • Series resistor on 33% · 100 kΩ (4)
SSpin 8Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (12)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Z3660 by sHaNsHe (Double H Tech) by shanshe, PCB Fujitora by OPRobots, CanBus-Radio-VAG by AugustoS97 and Nodo BMS by AugustoS97.

The MP2307 in open source designs

The gallery holds 20 open source boards using the MP2307 from 15 GitHub repositories; a typical one measures about 97.2 × 69.4 mm and carries around 69 components.

85% are two-layer designs, the rest use four layers or more, and 35% carry an open source license.

The most starred is Z3660 by sHaNsHe (Double H Tech) by shanshe.

Microcontrollers on boards using the MP2307

MP2307: common questions

Where can I find a MP2307 reference design?

Each of the 20 boards on this page is a real design using the MP2307. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MP2307 BS pin connected?

The BS pin has a series capacitor on 12 of 15 designs, most often 10 nF. Counted from the KiCad layouts of 15 open source designs using the MP2307.

How is the MP2307 SW pin connected?

The SW pin has a series capacitor on 12 of 15 designs, most often 10 nF. Counted from the KiCad layouts of 15 open source designs using the MP2307.

What resistor goes on the MP2307 FB pin?

The FB pin has a resistor to GND on 12 of 12 designs, most often 10 kΩ (then 15 kΩ). Counted from the KiCad layouts of 15 open source designs using the MP2307.

What parts are used alongside the MP2307?

The ESP32-WROOM-32, LD1117S33TR_SOT223, LMH0303, LMH0344 and STM32F100C8Tx appear in the most repositories here.

Which microcontrollers do boards using the MP2307 use?

Most are built on ESP32 (6), STM32 (4) and AVR/Arduino (2).

How big is a typical board using the MP2307?

The median is 97.2 × 69.4 mm, and 85% are two-layer designs.

What is the most popular open source board using the MP2307?

By GitHub stars, Z3660 by sHaNsHe (Double H Tech) by shanshe, with 77 stars.

Can I simulate one of these boards using the MP2307 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part