4 open source boards using the MT3608 module
Real designs built with the MT3608 module, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350USB Flash/EPROM Programmer
robsonsmartins
148.8 × 132.2 mm121 parts2LCC-BY-NC-4.035
Bs base
MelexinVN
99.1 × 99.1 mm24 parts2LGPL-3.02
RP2040/RP2350Momentum panel
rjhsun
127.9 × 77.3 mm34 parts2LNo license1
RP2040/RP2350Momentum
30.5 × 67.3 mm25 parts2LNo license1
The MT3608 module in open source designs
The gallery holds 4 open source boards using the MT3608 module from 3 GitHub repositories; a typical one measures about 113.5 × 88.2 mm and carries around 30 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is USB Flash/EPROM Programmer by robsonsmartins.
Microcontrollers on boards using the MT3608 module
What boards using the MT3608 module are built for
MT3608 module: common questions
Where can I find a MT3608 module reference design?
Each of the 4 boards on this page is a real design using the MT3608 module. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MT3608 module use?
Most are built on RP2040/RP2350 (3).
How big is a typical board using the MT3608 module?
The median is 113.5 × 88.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the MT3608 module?
By GitHub stars, USB Flash/EPROM Programmer by robsonsmartins, with 35 stars.
Can I simulate one of these boards using the MT3608 module before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.