11 open source boards using the SN74LVC1G17DBVR
Real designs built with the SN74LVC1G17DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350PD240W
theohg
66 × 66 mm213 parts6LCC-BY-NC-4.0116
Raspberry PiPintry
icamaster
100 × 100 mm166 parts4LMIT26
STM32Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1
Water controller
igorilla666
160 × 110 mm117 parts2LCERN-OHL-S-2.01
ESP32Handset
JeremyLakeyJr
66 × 142 mm217 parts4LNo license0
RP2040/RP2350MatrixDrive
Matrixite
100 × 65 mm143 parts8LNo license0
PICT20260928 PCB TEST
jamyang838
100 × 75 mm87 parts2LNo license0
Panel
da1sh1n
273 × 119.9 mm72 parts4LCC-BY-NC-4.00
Left
137.5 × 109.3 mm65 parts4LCC-BY-NC-4.00
Leftss
137.5 × 109.3 mm65 parts4LCC-BY-NC-4.00
Alvea keybaord right
137.5 × 109.3 mm63 parts4LCC-BY-NC-4.00
The SN74LVC1G17DBVR in open source designs
The gallery holds 11 open source boards using the SN74LVC1G17DBVR from 8 GitHub repositories; a typical one measures about 137.5 × 109.3 mm and carries around 117 components.
82% use four copper layers or more, and 18% carry an open source license.
The most starred is PD240W by theohg.
Parts used alongside the SN74LVC1G17DBVR
Microcontrollers on boards using the SN74LVC1G17DBVR
What boards using the SN74LVC1G17DBVR are built for
SN74LVC1G17DBVR: common questions
Where can I find a SN74LVC1G17DBVR reference design?
Each of the 11 boards on this page is a real design using the SN74LVC1G17DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC1G17DBVR use?
Most are built on RP2040/RP2350 (2), ESP32 (1), PIC (1) and Raspberry Pi (1).
How big is a typical board using the SN74LVC1G17DBVR?
The median is 137.5 × 109.3 mm, and 18% are two-layer designs.
What is the most popular open source board using the SN74LVC1G17DBVR?
By GitHub stars, PD240W by theohg, with 116 stars.
Can I simulate one of these boards using the SN74LVC1G17DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.