3 open source boards using the SN74LVC245
Real designs built with the SN74LVC245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32SimpleFC G
wangyeee
42 × 50 mm130 parts4LBSD-3-Clause9
XOSERA RCBUS
codesmythe
101.6 × 55.9 mm48 parts4LCC-BY-NC-4.02
STM32SimpleFCv2
42 × 50 mm119 parts4LBSD-3-Clause9
The SN74LVC245 in open source designs
The gallery holds 3 open source boards using the SN74LVC245 from 2 GitHub repositories; a typical one measures about 42 × 50 mm and carries around 119 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is SimpleFC G by wangyeee.
Microcontrollers on boards using the SN74LVC245
What boards using the SN74LVC245 are built for
SN74LVC245: common questions
Where can I find a SN74LVC245 reference design?
Each of the 3 boards on this page is a real design using the SN74LVC245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC245 use?
Most are built on STM32 (2).
How big is a typical board using the SN74LVC245?
The median is 42 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC245?
By GitHub stars, SimpleFC G by wangyeee, with 9 stars.
Can I simulate one of these boards using the SN74LVC245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.