4 open source boards using the SN74LVC245
Real designs built with the SN74LVC245, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SimpleFC G
wangyeee
42 × 50 mm130 parts4LBSD-3-Clause9XOSERA RCBUS
codesmythe
101.6 × 55.9 mm48 parts4LCC-BY-NC-4.02RP2040/RP2350
Atari link
hildenborg
58 × 62 mm24 parts2LMIT1STM32
SimpleFCv2
wangyeee
42 × 50 mm119 parts4LBSD-3-Clause9
The SN74LVC245 in open source designs
The gallery holds 4 open source boards using the SN74LVC245 from 3 GitHub repositories; a typical one measures about 50 × 52.9 mm and carries around 84 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is SimpleFC G by wangyeee.
Microcontrollers on boards using the SN74LVC245
What boards using the SN74LVC245 are built for
SN74LVC245: common questions
Where can I find a SN74LVC245 reference design?
Each of the 4 boards on this page is a real design using the SN74LVC245. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LVC245 use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the SN74LVC245?
The median is 50 × 52.9 mm, and 25% are two-layer designs.
What is the most popular open source board using the SN74LVC245?
By GitHub stars, SimpleFC G by wangyeee, with 9 stars.
Can I simulate one of these boards using the SN74LVC245 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.