9 open source boards using the SPAN02A-12
Real designs built with the SPAN02A-12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPPrecharge
michaelruppe
133 × 98 mm110 parts2LMIT56
NXPPrecharge
LSUTigerRacing
133 × 98 mm113 parts2LNo license7
NXPFault Latch 2
85.8 × 94.2 mm103 parts2LNo license7
TSAL-HVM
80.9 × 57.8 mm40 parts2LMIT56
NXPTEST
64 × 45.1 mm56 parts2LNo license7
TSALv3
71.6 × 42.7 mm38 parts2LMIT56
NXPRML-Yianni-Revamp
72.6 × 32.5 mm40 parts2LNo license7
NXPRML HVI
81 × 34 mm39 parts2LNo license7- schematic only · 8 parts
BreathOf fresh Air
8 parts2LNo license7
The SPAN02A-12 in open source designs
The gallery holds 9 open source boards using the SPAN02A-12 from 2 GitHub repositories; a typical one measures about 80.9 × 51.5 mm and carries around 40 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Precharge by michaelruppe.
Parts used alongside the SPAN02A-12
Microcontrollers on boards using the SPAN02A-12
SPAN02A-12: common questions
Where can I find a SPAN02A-12 reference design?
Each of the 9 boards on this page is a real design using the SPAN02A-12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SPAN02A-12?
The 4N35, LM1117-5.0, LM2904, LM331 and LM393 appear in the most repositories here.
Which microcontrollers do boards using the SPAN02A-12 use?
Most are built on NXP (6).
How big is a typical board using the SPAN02A-12?
The median is 80.9 × 51.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the SPAN02A-12?
By GitHub stars, Precharge by michaelruppe, with 56 stars.
Can I simulate one of these boards using the SPAN02A-12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.