2 open source boards using the SPX1117M3-L-3-3
Real designs built with the SPX1117M3-L-3-3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350HIDMorph
cedarhacks
75 × 55 mm39 parts4LNo license4
Indicator panel
dabridgham
133.1 × 77.2 mm75 parts2LNo license11
The SPX1117M3-L-3-3 in open source designs
The gallery holds 2 open source boards using the SPX1117M3-L-3-3 from 2 GitHub repositories; a typical one measures about 104.1 × 66.1 mm and carries around 57 components.
50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Indicator panel by dabridgham.
Microcontrollers on boards using the SPX1117M3-L-3-3
What boards using the SPX1117M3-L-3-3 are built for
SPX1117M3-L-3-3: common questions
Where can I find a SPX1117M3-L-3-3 reference design?
Each of the 2 boards on this page is a real design using the SPX1117M3-L-3-3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SPX1117M3-L-3-3 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the SPX1117M3-L-3-3?
The median is 104.1 × 66.1 mm, and 50% are two-layer designs.
What is the most popular open source board using the SPX1117M3-L-3-3?
By GitHub stars, Indicator panel by dabridgham, with 11 stars.
Can I simulate one of these boards using the SPX1117M3-L-3-3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.