4 open source boards using the TPS62132
Real designs built with the TPS62132, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAM.2-FPGA-Accelerator
KaiPereira
22 × 80 mm276 parts6LNo license24
STM32M4psu
cuspaceflight
269 × 155 mm246 parts2LNo license8
FPGAIcepool board
jkiv
140 × 58 mm116 parts4LCC-BY-NC-4.06
STM32Embedded-AGC-DSKY-emulator
Gregox273
91 × 120 mm157 parts2LGPL-3.03
The TPS62132 in open source designs
The gallery holds 4 open source boards using the TPS62132 from 4 GitHub repositories; a typical one measures about 115.5 × 100 mm and carries around 202 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is M.2-FPGA-Accelerator by KaiPereira.
What boards using the TPS62132 are built for
TPS62132: common questions
Where can I find a TPS62132 reference design?
Each of the 4 boards on this page is a real design using the TPS62132. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS62132 use?
Most are built on FPGA (2) and STM32 (2).
How big is a typical board using the TPS62132?
The median is 115.5 × 100 mm, and 50% are two-layer designs.
What is the most popular open source board using the TPS62132?
By GitHub stars, M.2-FPGA-Accelerator by KaiPereira, with 24 stars.
Can I simulate one of these boards using the TPS62132 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.