7 open source boards using the TPS70933DBVR
Real designs built with the TPS70933DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Esc rev b
iamdarshg
173.8 × 282.9 mm687 parts4LNo license2
PiPowerNew
stephendade
65 × 30 mm53 parts4LCERN-OHL-S-2.00
STM32Esc rev b.before hand power replicate
170 × 172.2 mm681 parts6LNo license2
STM32Esc
246 × 296 mm599 parts4LNo license2
Raspberry PiPiConnectLite
65 × 30.5 mm42 parts2LGPL-3.01
MYNDberry
teufelaudio
83.8 × 45.7 mm20 parts2LCC-BY-SA-4.076
AVR/ArduinoStrip dimmer
dennisss
41 × 20 mm11 parts2LApache-2.0381
The TPS70933DBVR in open source designs
The gallery holds 7 open source boards using the TPS70933DBVR from 5 GitHub repositories; a typical one measures about 83.8 × 45.7 mm and carries around 53 components.
57% use four copper layers or more, and 57% carry an open source license.
The most starred is Strip dimmer by dennisss.
Parts used alongside the TPS70933DBVR
Microcontrollers on boards using the TPS70933DBVR
What boards using the TPS70933DBVR are built for
TPS70933DBVR: common questions
Where can I find a TPS70933DBVR reference design?
Each of the 7 boards on this page is a real design using the TPS70933DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS70933DBVR use?
Most are built on STM32 (3), AVR/Arduino (1) and Raspberry Pi (1).
How big is a typical board using the TPS70933DBVR?
The median is 83.8 × 45.7 mm, and 43% are two-layer designs.
What is the most popular open source board using the TPS70933DBVR?
By GitHub stars, Strip dimmer by dennisss, with 381 stars.
Can I simulate one of these boards using the TPS70933DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.