8 open source boards using the XC6210B332MR
Real designs built with the XC6210B332MR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Aryess
pioz
303.8 × 94.2 mm238 parts2LMIT2
ESP82663ChannelCCdriver
wszeto9
49 × 49 mm58 parts2LNo license2
ESP32Camera-R2000
grbbt
70 × 70 mm82 parts4LMIT1
Esp pmsa
neggles
43 × 50 mm18 parts2LCC-BY-SA-4.01
RP2040/RP2350Diy watch
elsw
37.1 × 37 mm43 parts4LNo license0
RP2040/RP2350Doorman slot
AzonInc
23 × 32 mm26 parts4LGPL-3.0241
ESP82663ChannelCCdriver panelized
100 × 100 mm58 parts2LNo license2
STM32Stm32Board
Heorenmaru
30.4 × 25.2 mm20 parts2LCC-BY-SA-4.01
The XC6210B332MR in open source designs
The gallery holds 8 open source boards using the XC6210B332MR from 7 GitHub repositories; a typical one measures about 46 × 49.5 mm and carries around 51 components.
63% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Doorman slot by AzonInc.
Parts used alongside the XC6210B332MR
Microcontrollers on boards using the XC6210B332MR
What boards using the XC6210B332MR are built for
XC6210B332MR: common questions
Where can I find a XC6210B332MR reference design?
Each of the 8 boards on this page is a real design using the XC6210B332MR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XC6210B332MR use?
Most are built on RP2040/RP2350 (3), ESP8266 (2), ESP32 (1) and STM32 (1).
How big is a typical board using the XC6210B332MR?
The median is 46 × 49.5 mm, and 63% are two-layer designs.
What is the most popular open source board using the XC6210B332MR?
By GitHub stars, Doorman slot by AzonInc, with 241 stars.
Can I simulate one of these boards using the XC6210B332MR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.