10 open source boards using the 1028-RT6285GSP
Real designs built with the 1028-RT6285GSP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32DDB
robotique-udes
152.8 × 53.5 mm106 parts4LMIT0
ESP32Pdb
96.5 × 97.9 mm92 parts4LMIT0
ESP32Science module
100 × 72.5 mm71 parts4LMIT0
ESP32Arm drive
57.8 × 80 mm66 parts4LMIT0
ESP32Arm drive jl
80 × 50 mm60 parts4LMIT0
ESP32Arm drive j3 4 5
90 × 50 mm59 parts4LMIT0
ESP32Gripper 2024
59.5 × 90 mm57 parts4LMIT0
ESP32Arm drive j2
38 × 76 mm55 parts4LMIT0
ESP32Drive 27A
32.5 × 59.3 mm50 parts4LMIT0
ESP32AntenneMotorisé
100 × 70 mm39 parts4LMIT0
The 1028-RT6285GSP in open source designs
The gallery holds 10 open source boards using the 1028-RT6285GSP from 1 GitHub repository; a typical one measures about 85 × 71.3 mm and carries around 60 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is DDB by robotique-udes.
Microcontrollers on boards using the 1028-RT6285GSP
What boards using the 1028-RT6285GSP are built for
1028-RT6285GSP: common questions
Where can I find a 1028-RT6285GSP reference design?
Each of the 10 boards on this page is a real design using the 1028-RT6285GSP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 1028-RT6285GSP use?
Most are built on ESP32 (10).
How big is a typical board using the 1028-RT6285GSP?
The median is 85 × 71.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the 1028-RT6285GSP?
By GitHub stars, DDB by robotique-udes, with 0 stars.
Can I simulate one of these boards using the 1028-RT6285GSP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.