2 open source boards using the 2.54mm 1x8 socket
Real designs built with the 2.54mm 1x8 socket, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hw openmower yardforce
xtech
180 × 170 mm275 parts4LCC-BY-4.012AVR/Arduino
Hw module gps
xtech
93.3 × 58 mm14 parts4LCC-BY-4.00
The 2.54mm 1x8 socket in open source designs
The gallery holds 2 open source boards using the 2.54mm 1x8 socket from 2 GitHub repositories; a typical one measures about 136.6 × 114 mm and carries around 145 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Hw openmower yardforce by xtech.
Parts used alongside the 2.54mm 1x8 socket
Microcontrollers on boards using the 2.54mm 1x8 socket
What boards using the 2.54mm 1x8 socket are built for
2.54mm 1x8 socket: common questions
Where can I find a 2.54mm 1x8 socket reference design?
Each of the 2 boards on this page is a real design using the 2.54mm 1x8 socket. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 2.54mm 1x8 socket use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 2.54mm 1x8 socket?
The median is 136.6 × 114 mm, and 0% are two-layer designs.
What is the most popular open source board using the 2.54mm 1x8 socket?
By GitHub stars, Hw openmower yardforce by xtech, with 12 stars.
Can I simulate one of these boards using the 2.54mm 1x8 socket before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.