4 open source boards using the 22V10
Real designs built with the 22V10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
New enet
jayacotton
254 × 134.6 mm36 parts2LMIT21
Burstcart via
ytmytm
56 × 91 mm23 parts2LNo license4- schematic only · 34 parts
S100 enet
34 parts2LMIT21 
AVR/ArduinoBurstcart
56 × 91 mm21 parts2LNo license4
The 22V10 in open source designs
The gallery holds 4 open source boards using the 22V10 from 2 GitHub repositories; a typical one measures about 56 × 91 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is New enet by jayacotton.
Microcontrollers on boards using the 22V10
What boards using the 22V10 are built for
22V10: common questions
Where can I find a 22V10 reference design?
Each of the 4 boards on this page is a real design using the 22V10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 22V10 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 22V10?
The median is 56 × 91 mm, and 100% are two-layer designs.
What is the most popular open source board using the 22V10?
By GitHub stars, New enet by jayacotton, with 21 stars.
Can I simulate one of these boards using the 22V10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.