3 open source boards using the 24LC01
Real designs built with the 24LC01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Pro rev1
TheRetroWeb
102.6 × 107.3 mm130 parts4LCERN-OHL-P-2.058RP2040/RP2350
ISA rev8
TheRetroWeb
99.6 × 69.2 mm42 parts2LCERN-OHL-P-2.058ESP8266
Jard wemos
bpmine
57 × 42 mm30 parts2LNo license0
The 24LC01 in open source designs
The gallery holds 3 open source boards using the 24LC01 from 2 GitHub repositories; a typical one measures about 99.6 × 69.2 mm and carries around 42 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Pro rev1 by TheRetroWeb.
Microcontrollers on boards using the 24LC01
What boards using the 24LC01 are built for
24LC01: common questions
Where can I find a 24LC01 reference design?
Each of the 3 boards on this page is a real design using the 24LC01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 24LC01 use?
Most are built on RP2040/RP2350 (2) and ESP8266 (1).
How big is a typical board using the 24LC01?
The median is 99.6 × 69.2 mm, and 67% are two-layer designs.
What is the most popular open source board using the 24LC01?
By GitHub stars, Pro rev1 by TheRetroWeb, with 58 stars.
Can I simulate one of these boards using the 24LC01 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.