6 open source boards using the 27C512PLCC

Real designs built with the 27C512PLCC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The 27C512PLCC in open source designs

The gallery holds 6 open source boards using the 27C512PLCC from 4 GitHub repositories; a typical one measures about 87.7 × 64.1 mm and carries around 23 components.

67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Gb cartridge rom ram by roybaer.

Parts used alongside the 27C512PLCC

Microcontrollers on boards using the 27C512PLCC

What boards using the 27C512PLCC are built for

27C512PLCC: common questions

Where can I find a 27C512PLCC reference design?

Each of the 6 boards on this page is a real design using the 27C512PLCC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 27C512PLCC use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 27C512PLCC?

The median is 87.7 × 64.1 mm, and 67% are two-layer designs.

What is the most popular open source board using the 27C512PLCC?

By GitHub stars, Gb cartridge rom ram by roybaer, with 16 stars.

Can I simulate one of these boards using the 27C512PLCC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part