9 open source boards using the 7407
Real designs built with the 7407, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Z3660 by sHaNsHe (Double H Tech)
shanshe
173.9 × 93.4 mm159 parts4LGPL-3.077Odyssey 2 rgb
abzman
83.3 × 78.2 mm70 parts2LUnlicense19Unipolar stepper driver
soghayarmahmoud
88.2 × 73.8 mm22 parts2LCERN-OHL-S-2.04Xc9572 breakout
abzman
50.8 × 43.2 mm43 parts2LUnlicense19Ttl to composite video generator
abzman
59.7 × 37.5 mm29 parts2LUnlicense19Radio Shack Mini Speaker work alike
abzman
41.3 × 60.3 mm24 parts2LUnlicense19556 power on reset
abzman
32.4 × 22.2 mm14 parts2LUnlicense19Raspberry Pi
Gpib breakout
abzman
51.7 × 66 mm14 parts2LUnlicense19Spi led breakout
abzman
93.7 × 43.2 mm14 parts2LUnlicense19
The 7407 in open source designs
The gallery holds 9 open source boards using the 7407 from 3 GitHub repositories; a typical one measures about 59.7 × 60.3 mm and carries around 24 components.
89% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Z3660 by sHaNsHe (Double H Tech) by shanshe.
Microcontrollers on boards using the 7407
What boards using the 7407 are built for
7407: common questions
Where can I find a 7407 reference design?
Each of the 9 boards on this page is a real design using the 7407. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 7407 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the 7407?
The median is 59.7 × 60.3 mm, and 89% are two-layer designs.
What is the most popular open source board using the 7407?
By GitHub stars, Z3660 by sHaNsHe (Double H Tech) by shanshe, with 77 stars.
Can I simulate one of these boards using the 7407 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.