2 open source boards using the 74ACT32

Real designs built with the 74ACT32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The 74ACT32 in open source designs

The gallery holds 2 open source boards using the 74ACT32 from 2 GitHub repositories; a typical one measures about 173.1 × 144.7 mm and carries around 78 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is 14mhz accelerator by Mathesar.

What boards using the 74ACT32 are built for

74ACT32: common questions

Where can I find a 74ACT32 reference design?

Each of the 2 boards on this page is a real design using the 74ACT32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the 74ACT32?

The median is 173.1 × 144.7 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74ACT32?

By GitHub stars, 14mhz accelerator by Mathesar, with 78 stars.

Can I simulate one of these boards using the 74ACT32 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part