5 open source boards using the 74AUP2G132
Real designs built with the 74AUP2G132, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Oculink pcie adapter
antmicro
58 × 135 mm127 parts4LApache-2.020- schematic only · 59 parts
Com express-7-baseboard
antmicro
59 partsApache-2.012 - schematic only · 26 parts
Dc scm osm l carrier card
antmicro
26 partsApache-2.010 - schematic only · 135 parts
Modular agilex5e dc scm
antmicro
135 partsApache-2.01 STM32
PC ExtensionBoard
caotiendattx
128.3 × 98.3 mm263 parts6LNo license0
The 74AUP2G132 in open source designs
The gallery holds 5 open source boards using the 74AUP2G132 from 5 GitHub repositories; a typical one measures about 93.1 × 116.6 mm and carries around 127 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is Oculink pcie adapter by antmicro.
Parts used alongside the 74AUP2G132
Microcontrollers on boards using the 74AUP2G132
What boards using the 74AUP2G132 are built for
74AUP2G132: common questions
Where can I find a 74AUP2G132 reference design?
Each of the 5 boards on this page is a real design using the 74AUP2G132. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 74AUP2G132 use?
Most are built on STM32 (1).
How big is a typical board using the 74AUP2G132?
The median is 93.1 × 116.6 mm, and 0% are two-layer designs.
What is the most popular open source board using the 74AUP2G132?
By GitHub stars, Oculink pcie adapter by antmicro, with 20 stars.
Can I simulate one of these boards using the 74AUP2G132 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.