5 open source boards using the 74HC137

Real designs built with the 74HC137, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The 74HC137 in open source designs

The gallery holds 5 open source boards using the 74HC137 from 3 GitHub repositories; a typical one measures about 160 × 98 mm and carries around 64 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Z80 by dennis9819.

Parts used alongside the 74HC137

Microcontrollers on boards using the 74HC137

What boards using the 74HC137 are built for

74HC137: common questions

Where can I find a 74HC137 reference design?

Each of the 5 boards on this page is a real design using the 74HC137. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74HC137?

The cue, SN74CBTLV3125 and ULN2002 appear in the most repositories here.

Which microcontrollers do boards using the 74HC137 use?

Most are built on Raspberry Pi (2).

How big is a typical board using the 74HC137?

The median is 160 × 98 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74HC137?

By GitHub stars, Z80 by dennis9819, with 2 stars.

Can I simulate one of these boards using the 74HC137 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part