5 open source boards using the 74LVC1G80

Real designs built with the 74LVC1G80, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The 74LVC1G80 in open source designs

The gallery holds 5 open source boards using the 74LVC1G80 from 3 GitHub repositories; a typical one measures about 90 × 91 mm and carries around 105 components.

80% use four copper layers or more, and 40% carry an open source license.

The most starred is Inwall relay by slaesh.

Microcontrollers on boards using the 74LVC1G80

What boards using the 74LVC1G80 are built for

74LVC1G80: common questions

Where can I find a 74LVC1G80 reference design?

Each of the 5 boards on this page is a real design using the 74LVC1G80. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 74LVC1G80 use?

Most are built on ESP32 (3).

How big is a typical board using the 74LVC1G80?

The median is 90 × 91 mm, and 20% are two-layer designs.

What is the most popular open source board using the 74LVC1G80?

By GitHub stars, Inwall relay by slaesh, with 11 stars.

Can I simulate one of these boards using the 74LVC1G80 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part