2 open source boards using the A14 Select
Real designs built with the A14 Select, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PICOpenAC1
davischris
191.5 × 97.6 mm71 parts2LGPL-3.04
AVR/ArduinoRC6502 Apple 1 SBC
tebl
99.1 × 99.7 mm48 parts2LGPL-3.0192
The A14 Select in open source designs
The gallery holds 2 open source boards using the A14 Select from 2 GitHub repositories; a typical one measures about 145.3 × 98.7 mm and carries around 60 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is RC6502 Apple 1 SBC by tebl.
Parts used alongside the A14 Select
Microcontrollers on boards using the A14 Select
What boards using the A14 Select are built for
A14 Select: common questions
Where can I find a A14 Select reference design?
Each of the 2 boards on this page is a real design using the A14 Select. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the A14 Select?
The 74HCT00, 74HCT04, 74HCT138, A13 Select and HM62256BLP-7 appear in the most repositories here.
Which microcontrollers do boards using the A14 Select use?
Most are built on AVR/Arduino (1) and PIC (1).
How big is a typical board using the A14 Select?
The median is 145.3 × 98.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the A14 Select?
By GitHub stars, RC6502 Apple 1 SBC by tebl, with 192 stars.
Can I simulate one of these boards using the A14 Select before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.