17 open source boards using the MCP23S17
Real designs built with the MCP23S17, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Neotron-Pico
Neotron-Compute
243.8 × 171.5 mm220 parts4LNo license249AVR/Arduino
Super Sixteen v1
matthewcieplak
111.3 × 106.4 mm141 parts2LNo license171Gamegirl
davidperrenoud
65 × 100 mm88 parts2LNo license109PIC
OpenAC1
davischris
191.5 × 97.6 mm71 parts2LGPL-3.04AVR/Arduino
Z80-arduino
stefanberndtsson
94 × 75.6 mm28 parts2LNo license1AVR/Arduino
DerTempomat
cybaer
40.6 × 109.2 mm67 parts2LNo license0AVR/Arduino
RC6502 Apple 1 SBC
tebl
99.1 × 99.7 mm48 parts2LGPL-3.0192Kicad control board
matthewcieplak
100 × 110 mm97 parts2LNo license171AVR/Arduino
Z80ctrl
jblang
99.8 × 49.9 mm30 parts2LMIT73AVR/Arduino
Q10MF BOARD
brijohn
281 × 79 mm44 parts2LNo license9Z80ctrl iox
jblang
99.8 × 49.9 mm29 parts2LMIT73AVR/Arduino
QX10 Titan QXPC Memory Board
brijohn
254 × 63.5 mm40 parts2LNo license9Ald solenoidControl
greyltc
40 × 89 mm35 parts4LCERN-OHL-1.20RP2040/RP2350
P8x bustest card
ksr
280 × 140 mm41 parts4LNo license0NewMUX
greyltc
40 × 89 mm33 parts4LCERN-OHL-1.20AVR/Arduino
Controller
greyltc
45.1 × 110 mm32 parts4LCERN-OHL-1.20AVR/Arduino
RC6502 Serial IO
tebl
99.1 × 66 mm21 parts2LGPL-3.0192
How designs wire the MCP23S17
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MCP23S17 connects to, and the resistors, capacitors and other passives placed on it.
- The A0 pin is tied to GND on 10 of 11 designs.
- The A1 pin is tied to GND on 10 of 11 designs.
- The A2 pin is tied to GND on 10 of 11 designs.
- The INTB pin is left unconnected on 9 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 9 | Connected to: VCC 100% |
|
| VSSpin 10 | Connected to: GND 100% | — |
| A0pin 15 | Connected to: GND 91% | — |
| A1pin 16 | Connected to: GND 91% | — |
| A2pin 17 | Connected to: GND 91% | — |
| INTBpin 19 | Connected to: Not connected 82% | — |
| INTApin 20 | Connected to: Not connected 82% | — |
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neotron-Pico by Neotron-Compute, RC6502 Apple 1 SBC by tebl, Kicad control board by matthewcieplak and Gamegirl by davidperrenoud.
The MCP23S17 in open source designs
The gallery holds 17 open source boards using the MCP23S17 from 11 GitHub repositories; a typical one measures about 99.8 × 97.6 mm and carries around 41 components.
71% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is Neotron-Pico by Neotron-Compute.
Parts used alongside the MCP23S17
Microcontrollers on boards using the MCP23S17
What boards using the MCP23S17 are built for
MCP23S17: common questions
Where can I find a MCP23S17 reference design?
Each of the 17 boards on this page is a real design using the MCP23S17. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP23S17 A0 pin connected?
The A0 pin is tied to GND on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MCP23S17.
How is the MCP23S17 A1 pin connected?
The A1 pin is tied to GND on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MCP23S17.
How is the MCP23S17 A2 pin connected?
The A2 pin is tied to GND on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MCP23S17.
What parts are used alongside the MCP23S17?
The 74HCT00, 74HCT04, 74HCT138, 74LS245 and A13 Select appear in the most repositories here.
Which microcontrollers do boards using the MCP23S17 use?
Most are built on AVR/Arduino (9), RP2040/RP2350 (2) and PIC (1).
How big is a typical board using the MCP23S17?
The median is 99.8 × 97.6 mm, and 71% are two-layer designs.
What is the most popular open source board using the MCP23S17?
By GitHub stars, Neotron-Pico by Neotron-Compute, with 249 stars.
Can I simulate one of these boards using the MCP23S17 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.